used vacuum evaporator
details to article: 30191
description: Evaporator system for concentrating highly corrosive media. The system consists of a stainless steel vessel with a boiling and condensation chamber. It is equipped with defoaming, sight glass with lighting and cleaning. Furthermore, a concentrate pump, distillate pump and a vacuum pump as well as a piston compressor are available.
| Producer: | ITALSCHELL |
| Typ: | ECOPRIMA 3000-CR |
| Year of manufacture: | 2009 |
| Pieces: | 1 |
| Condition: | gebraucht / used / second hand |
Alle Angaben, Bilder, Hinweise und Empfehlungen erfolgen nach bestem Wissen, je- doch ohne Gewähr. Änderungen der technischen Angaben bleiben vorbehalten.
informations about: evaporator Evaporator is a device used to turn (or allow to turn) the liquid form of a chemical into its gaseous form. An evaporator is used in an air conditioning system to allow the compressed cooling chemical, Freon, to evaporate from liquid to gas while absorbing heat in the process. It can also be used to remove water or other liquids from mixtures. The process of evaporation is widely used to concentrate foods and chemicals as well as salvage solvents. In the concentration process, the goal of evaporation is to vaporize most of the water from a solution containing the desired product. In the case of desalination of sea water, the reverse purpose applies; evaporation removes the desirable drinking water from the undesired product, salt. One of the most important applications of evaporation is in the food and beverage industry. Foods or beverages that need to last for a considerable amount of time or need to have certain consistency, like coffee, go through an evaporation step during processing. In the pharmaceutical industry, the evaporation process is used to eliminate excess moisture, providing an easily-handled product and improving product stability. Preservation of long-term activity or stabilization of enzymes in laboratories are greatly assisted by the evaporation process. Another example of evaporation is in the recovery of sodium hydroxide in kraft pulping. Cutting down waste handling cost is another major reasons for large companies to use evaporation applications. Legally, all producers of waste must dispose of waste using methods compatible with environmental guidelines; these methods are costly. By removing moisture through vaporization, industry can greatly reduce the amount of waste product that must be processed. The solution containing the desired product is fed into the evaporator and passes a heat source. The applied heat converts the water in the solution into vapor. The vapor is removed from the rest of the solution and is condensed while the now concentrated solution is either fed into a second evaporator or is removed. The evaporator as a machine generally consists of four sections. The heating section contains the heating medium, which can vary. Steam is fed into this section. The most common medium consists of parallel tubes but others have plates or coils. The concentrating and separating section removes the vapor being produced from the solution. The condenser condenses the separated vapor, then the vacuum or pump provides pressure to increase circulation. From Wikipedia, the free encyclopedia | ||||||||||||||||||||||||||||||||||||||
| email: mail@tipp-international.de | ||||||||||||||||||||||||||||||||||||||
| Internet: www.tipp-international.de | ||||||||||||||||||||||||||||||||||||||
